Lenze Engineer v2.21 - Manual (Page 106)

Device functions with active online connection
Application and parameter set transfer
106
Lenze · Engineer · 2.13 EN - 10/2014
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Step 3 - data transfer: The progress of data transfer is displayed.
Step 4 - Start devicesDefine the desired options and, for several devices, the sequence for
starting the devices.
9. Click Complete.
• Start the selected devices.
• After a successful execution, the dialog box is closed automatically if you have activated
the Also show if successful option in the first step.
7.3.3 Upload parameter set
...transfers the parameter set currently available in the device to the »Engineer« project.

How to transfer the parameter set from the device to the »Engineer«:
1. Select the device from which the parameter set is to be read in the Project view.
2. If no online connection to the device has been established yet:
Click the icon or select the menu command Online  Go online to establish an online
connection to the device.  Going online ( 77)
3. When there is an online connection to the device:
Click the icon or select the menu command Online Upload parameter set.
• The Upload parameter set dialog box is displayed:
Step 1 - Settings
4. Define the required options for the transfers to be executed.
• The Options... button opens the dialog box Options which contains general settings for
transferring the data transfer.  Options ( 99)
5. Click Next to start the data transfer.
Step 2 - data transfer: The progress of data transfer is displayed.
• After a successful execution, the dialog box is closed automatically if you have activated
the 1 Also show if successful option in the step 1.