Lenze Engineer v2.21 - Manual (Page 108)

Device functions with active online connection
Optical tracking - device identification within the machine
108
Lenze · Engineer · 2.13 EN - 10/2014
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
If the "Optical tracking" function is activated, the »Engineer« causes the device connected online to
blink with all LEDs for an adjustable time. After the time has elapsed, or if the user exits the function
beforehand, the device controls its LEDs normally again.

How to activate the optical tracking:
1. Select desired device in the project tree
• Establish online connection to the device  Going online ( 77)
2. Click the icon or select the menu command OnlineOptical tracking
• Optionally the period for which the device to be located is to be activated can be selected
from the selection list.

Note!
• The "Optical tracking" function is available depending on the device.
• An online connection to the device that is to be located
has to be established.