Lenze Engineer v2.21 - Manual (Page 9)

Lenze · Engineer · 2.13 EN - 10/2014
9
About this documentation
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
1 About this documentation
This documentation contains information about the Lenze »Engineer«.
The »Engineer« is a Lenze engineering tool for different types of devices and is used for
parameterising, configuring and diagnosing Lenze devices (such as controllers, motors, I/O systems)
as well as machine control systems.
Short overview
Chapter Contents
 Safety instructions ( 12) ...contains safety instructions which have to be observed if you want to
commission a controller or a system by means of the »Engineer«.
 User interface ( 13) ...describes the user interface structure in the »Engineer«
 Getting started: creating a project
( 30)
...describes how to create a project in the »Engineer«.
 Establishing an online connection
( 75)
... describes how to establish an online connection to one or several
devices.
 Device functions with active online
connection ( 98)
... describes how to execute the control functions of a device and a
parameter set/program transfer between the device and the
»Engineer«.
...describes the diagnostics options when an online connection has been
established to the device.
 Defining the system functionality
( 128)
...describes how to define the functionality of your entire system in the
»Engineer«.
 Inserting & configuring a network
( 202)
...describes how to add networks to the project and configure them to
ensure the communication between the devices of the system.