Lenze Engineer v2.21 - Manual (Page 269)

Lenze · Engineer · 2.13 EN - 10/2014
269
Appendix
Export data
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
14.1.3 Export parameters to a »L-force Loader« (LFL) file
The »Engineer« makes it possible to export the parameters of a controller to a file for use in the »L-
force Loader«.
• The export function is available for controllers of the Servo Drives 9400 and the Inverter Drives
8400 device series.

How to export parameters to an »L-force Loader« file:
1. Select the required controller in the Project view.
2. Execute the Export L-force Loader file command in the Context menu of the controller.
• The »Engineer« checks whether the project is up to date. If not, a note appears. Here you
can cancel the export and update the project before you recall the export function.
 Build project ( 76)
3. Specify the following options in the Export L-force Loader file dialog box:
• Output file and memory location
• Files to be transferred
• Parameters to be exported
The parameters exported include the same data as in the transfer of a parameter set and an
application download.
 Download parameter set to device ( 105)
 Download program to device ( 103)
The »L-force Loader« export writes all application data to an *.lfl file. This file includes all data of an
application transfer the »Engineer« will write to the respective device.
14.1.4 Export parameter values of the devices
The parameters can be exported in the following file formats:
• »Global Drive Control«: *.gdc
• "Comma-Separated Values": *.csv
• Text/Unicode (UTF-8): *.txt