Lenze Engineer v2.21 - Manual (Page 76)

Establishing an online connection
Build project
76
Lenze · Engineer · 2.13 EN - 10/2014
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

Tip!
In the »Engineer« an existing online connection can be identified by the animated graphics
below the Project view bar:
6.1 Build project
In order to render changes on a project effective, the project must be updated manually. Each device
inserted in the »Engineer« has a separate update status. Like this the update is only required for the
device changed in each case (and not for the whole project).

How to update the project:
1. In the Toolbar, activate .
• Confirm the note to open the Build project dialog box.
Tip: The dialog box can be opened via the button in the Toolbar, the Tools  Build
project menu command, or the <F11> key.
• Activate the Rebuild all option to update all project elements. The update process can
take longer in case of bigger projects.
2. Click the Build button.
• When the update is completed, a note appears whether the update was successful.