Lenze Engineer v2.21 - Manual (Page 294)

Appendix
User motors
294
Lenze · Engineer · 2.13 EN - 10/2014
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
2. Select Create user motor via the context menu of the controller.
• The Create user motor from controller settings dialog box opens.
3. Enter the data required in the dialog box.
• The nameplate data (general data such as rated power and rated frequency) of the new
user motor are calculated from the codes of the controller previously selected if possible.
• If some pieces of nameplate data cannot be calculated from the code values of a specific
controller (example: the rated motor power cannot be calculated from the parameters
of an 8200vector), the respective input field in the Create user motor from controller
settings from dialog box remains empty. The values can be entered manually.
4. Click Next.