Lenze Engineer v2.21 - Manual (Page 49)

Lenze · Engineer · 2.13 EN - 10/2014
49
Mapping the system structure in the »Engineer« project
Modularising with system modules and axes
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
2. Click the icon to open the wizard for adding an axis.
Step 1 - Properties
3. Enter the Description of the axis.
• Enter an optional Comment for the axis which helps identifying the axis during later
edition.
• If the control field Insert individual components into the axis has been activated, you
must click the Next button to select the components (drive controller, motor, etc.) that
the axis is to contain.
4. Press Continue or Complete.
• Optionally, you can Insert individual components into axis or insert other components
later on.