Lenze Engineer v2.21 - Manual (Page 299)

Lenze · Engineer · 2.13 EN - 10/2014
299
Appendix
User motors
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
14.4.4 Modifying/supplementing motor default values
If a controller has already been connected to a user motor in your project, the default values saved
in the user motor can be modified by overwriting those values with the current code values of the
controller.
If the user motor has not previously been provided with default values for the controller group in
question, the default values are supplemented by the new data.

How to modify motor default values:
1. Create an »Engineer« project including a user motor.
2. Highlight the user motor.
3. Click the Modify/supplement motor default values button in the Motor parameter tab.
Note: The controller settings will overwrite the default values of the user motor!
• Confirm the query by clicking the Yes button to overwrite the default values of the user
motor.