Lenze Engineer v2.21 - Manual (Page 2)

Target group
This documentation is intended for all persons who want to use the »Engineer«
engineering software to parameterise, configure and diagnose field devices and control
systems.
Screenshots/application examples
All screenshots provided in this documentation are application examples. Depending on
the firmware version of the Lenze devices and installed engineering tools (here: Lenze
»Engineer«), the representation may differ from the actual screen display.
Information regarding the validity
The information in this documentation is valid for the following Lenze software:
Document history
Software From version
»Engineer« 2.19
Version Description
2.12 10/2013 TD11 Updated contents for the »Engineer« V2.19 software version
2.11 11/2012 TD11 Updated contents for the »Engineer« V2.17 software version
2.10 05/2012 TD11 Updated contents for the »Engineer« V2.16 software version
2.9 11/2011 TD11 Updated contents for the »Engineer« V2.15 software version
2.8 04/2011 TD11 Updated contents for the »Engineer« V2.14 software version
2.7 11/2010 TD11 Updated contents for the »Engineer« V2.13 software version
2.6 04/2010 TD11 Updated contents for the »Engineer« V2.12 software version
2.5 10/2009 TD11 Updated contents for the software version »Engineer« V2.10 SP3
2.4 08/2009 TD11 Updated chapter: Managing cam data with the »Cam Manager« ( 272)
2.3 04/2009 TD11 Optimised structures, update of dialog boxes & extension by new functions
of »Engineer« V2.10:
• Data logger
• Compare and copy parameter sets
2.2 11/2008 TD11 Extended by new functions of »Engineer« V2.9:
• L-force Loader Export, optimised menu control, device data update and
establishing an online connection.
• New chapter "Handling catalogues".
2.1 07/2008 TD11 Extended by new functions: User motors, Cam Manager, Cam Editor
2.0 10/2007 TD16 First edition