Lenze Engineer v2.21 - Manual (Page 23)

Lenze · Engineer · 2.13 EN - 10/2014
23
User interface
Status information
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
If you edit a parameter value in an input field, you can see from the colour of the text whether the
altered value has already been integrated into the project or the device and is within the valid range.
3.5 Status information
Information on the status of the project and devices/applications.
Depending on the device connection used, more information can be displayed in the status line, as
for instance the application status or unsaved changed of the parameter set.
Colour Example Meaning
Black Parameter value that is within the valid range and that has already been integrated
into the project or device.
Blue Altered parameter value that has not yet been integrated into the project or the
device.
• By pressing the <input key>, you accept the altered value.
• You can reject the change by pressing the <ESC> key.
Red Changed parameter value which is outside the valid range.
• You can reject the change by pressing the <ESC> key.
Information Meaning
Project status
All project information is up to date.
• The project element selected in the Project tree does not have to be updated.
The project contains unsaved changes.
• Build the project by pressing the button in the Toolbar.  Build project ( 76)
Device status
The device is offline.
• No online connection to the device.
Active online connection to the device.
• The »Engineer« communicates with device via a bus connection.  Establishing
an online connection ( 75)
Active online connection is interrupted.
• An established online connection between the device and the »Engineer« is
interrupted (communication error).
DDCMP:/
Device-dependent access path
• The access path depends on the respective bus connection.
The controller is inhibited.
• The controller inhibit is set. Move the mouse pointer over the status information
of the controller in the status line to display the source of the controller inhibit.
The controller is enabled.