Lenze Engineer v2.21 - Manual (Page 140)

Defining the system functionality
Parameter setting in the »Engineer«
140
Lenze · Engineer · 2.13 EN - 10/2014
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
[8-1] Compare parameter set: Example EL 870
• In order to execute a comparison with the parameter set of an online-connected device,
select "Online" in one of the upper list fields.
• The Display option area serves to filter the project view and show only specific
parameters.
4. Click the Compare button:
• The parameter settings of the device are read out and the process of the data
transmission is displayed in the Transfer dialog box.
• After the data transmission has been completed, the result of the comparison is
displayed in the form of a parameter list in the Compare parameters dialog box.
• In the default setting, the parameter list only specifies the parameters the value of
which in the device differs from the parameter value saved in the project.