Lenze Engineer v2.21 - Manual (Page 165)

Lenze · Engineer · 2.13 EN - 10/2014
165
Defining the system functionality
Port editor (ports)
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
8.11.2.3 Define a port with "Array" variable type

How to define a port with the "Array" variable type:
1. Carry out the steps as described in the instructions in the chapter " Adding a port ( 162) ".
2. Go to the Variable type selection field and select the "Array" entry.
• The Port definition dialog box is then presented as follows.
3. Select the required data type in the Type selection field.
4. Enter the required number in the No. of elements input field.
5. Click the Next button.
6.
Defining the interface and process data object ( 168)
7. Click the Complete button to complete the port definition.