Defining the system functionality – Lenze Engineer v2.21 User Manual
Page 187
Advertising
Lenze · Engineer · 2.13 EN - 10/2014
187
Defining the system functionality
Creating an interconnection via the electrical shaft
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Step 1 – Adding an interconnection
5. Enter a name for the electrical shaft in the Name text field.
• Optionally you can enter a comment on the electrical shaft in the Comment text field.
6. Click the Next button.
Step 2 – Creating an interconnection
Necessary because all axes of a machine do not necessarily have to be operated from the
electrical shaft.
Advertising