Lenze Engineer v2.21 - Manual (Page 279)

Lenze · Engineer · 2.13 EN - 10/2014
279
Appendix
Creating cam data with the »Cam Editor«
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
14.3 Creating cam data with the »Cam Editor«
With the »Cam Editor« you can create curves (motion profiles or characteristics) with the help of
graphic objects (point, line, polynomial) as well as cams and position markers for drive controllers
with cam functionality.
• The »Cam Editor« is a standard component of the »Engineer« HighLevel and provides basic
curve functions.
• The optionally available »Cam Designer 3« provides additional functions for more extensive
applications:
• Additional possible curve object types that can be inserted in the curve sheet.
• Curve components (sub-curves) can be edited.
• The function "Trigger automatic connection of segments" has been activated.
• The technology wizard for cross cutter solutions has been activated.
• The upgrade from the »Cam Editor« to »Cam Designer 3« and thus the activation of the full
functional range will be carried out along with the installation of a licence key via a separate
setup which can be purchased from Lenze.