3 removing nodes, Removing nodes, Inserting & configuring a network – Lenze Engineer v2.21 User Manual
Page 220
Advertising
Inserting & configuring a network
CAN network
220
Lenze · Engineer · 2.13 EN - 10/2014
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
3. Carry out the corresponding node settings in the Properties, Settings and Monitoring tabs.
• Via the
icon in the Toolbar you can go back to the settings of the network.
9.4.1.3
Removing nodes
Click the
icon in the Network toolbar to remove the selected node from the network.
Advertising