Lenze Engineer v2.21 - Manual (Page 53)

Lenze · Engineer · 2.13 EN - 10/2014
53
Mapping the system structure in the »Engineer« project
Inserting components
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
5.2.1 Inserting controllers

How to insert a drive controller:
1. Open the Project view and select the desired system module / axis the drive
controller is to be inserted into.
2. In the Toolbar, click to open the insertion wizard.
Step 1 - component/device series (example: 9400 HighLine)
3. Select the Controller tab.
• The Search results list field shows the controllers which can be used together with the
»Engineer«:
• Optionally, you can define Search criteria for restricting the Search results.
• Click the Search button to update the search results.
4. Select the controller to be inserted in the Search results list field.
5. Click the Next button.
Step 2 - Device modules (example: 9400 HighLine)
Select the device modules plugged in the device.