Lenze Engineer v2.21 - Manual (Page 274)

Appendix
Managing cam data with the »Cam Manager«
274
Lenze · Engineer · 2.13 EN - 10/2014
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Altering properties of a product
With the command Properties of the product, you can open the Properties dialog box, in which the
properties of the product can be displayed and edited:
Characteristic Info
Name Name of the product
Product number Definite product number
• Is shown in the »Cam Manager« in the squared brackets after the product name.
• For a global product changeover, this number is to be transferred to the
LS_CamInterface SB in the application via the input CAM_dnProductNumber and
this is to be carried out synchronously for all drives in the interconnection.
Cycle Cycle of the master measuring system
• Defines the scaling of the x axis in the Worksheet of the »Cam Editor«.
• Default setting: 0° .... 360°