Establishing an online connection – Lenze Engineer v2.21 User Manual
Page 92
Advertising
Establishing an online connection
Going online
92
Lenze · Engineer · 2.13 EN - 10/2014
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
• On the Interfaces tab, click the New button.
7. Select the Ethernet connection to be used for the online connection.
The Ethernet connection must be the connection previously projected in the HWCONFIG.
• Example: select Ethernet connection Ethernet(1)
• Accept selection with OK.
8. The previously selected Ethernet interface must be assigned to the PG/PC connection.
• Assign selected PG/PC connection: click the Assign button.
• Confirm following query with OK to assign the connection.
Advertising