Lenze Engineer v2.21 - Manual (Page 54)

Mapping the system structure in the »Engineer« project
Inserting components
54
Lenze · Engineer · 2.13 EN - 10/2014
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
• Select/Delete desired device modules.
6. Click the Next button.
7. Step 3 - application
Select the application of the automation solution you want to implement.
8. Click the Next / Complete button to insert the controller.
• If no other components have been selected, the controller will be inserted into the
selected axis / system module without any other components.
 Inserting application ( 55)