Lenze Engineer v2.21 - Manual (Page 131)

Lenze · Engineer · 2.13 EN - 10/2014
131
Defining the system functionality
General notes with regard to the procedure
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
8.3 General notes with regard to the procedure
For describing the functions of the system, the following procedure is recommended:
1. Parameterise& configure the devices
Carry out the parameter settings required for the individual devices and the applications assigned.
 Parameterising & configuring the devices ( 132)
2. Generate a machine application
Generate a machine application within a system module or an axis to realise device-independent
functions.
 Inserting & configuring a machine application ( 173)
3. Compile the whole project
Build the project to automatically generate all relevant parameter assignments for the networks
and devices contained in the project.
 Build project ( 76)

Note!
The procedure described below uses one application for the project.
• To display hierarchical structures, a project may include multiple applications!