Lenze Engineer v2.21 - Manual (Page 242)

Error messages
PortLogic generator
242
Lenze · Engineer · 2.13 EN - 10/2014
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Invalid task context: port is associated with task {0} [PL0005]
Response (Lenze setting printed in bold)
 Error  Warning  Information
Cause Remedy
An attempt is made to assign a port to a task that is not
available on the device or in the PLC Designer project.
Due to the fact that the FB Editor has been activated/
enabled for the associated application, the ports are
automatically assigned to the user task and this warning
is output.