Lenze Engineer v2.21 - Manual (Page 191)

Lenze · Engineer · 2.13 EN - 10/2014
191
Defining the system functionality
Creating an interconnection via the electrical shaft
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
8.14.4.2 Assigning an axis to a placeholder
You can assign a real axis to an existing placeholder at any time later on.

How to assign an axis to an already existing placeholder:
1. In the Interconnection tab, select the axis in the field on the left entitled Available axes and
click the button.
• If there is at least one placeholder to which an axis has not yet been assigned, the dialog
box entitled Add device to placeholder is shown:
2. Activate the Use existing placeholders control field.
3. In the list field, select the placeholder to which the axis is to be assigned.
4. Click the Next button.