Lenze Engineer v2.21 - Manual (Page 61)

Lenze · Engineer · 2.13 EN - 10/2014
61
Mapping the system structure in the »Engineer« project
Inserting components
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
5.2.6.1 System 1000
5.2.6.2 Compact I/O system IP20
A compact I/O system has a fixed number of digital inputs and outputs.

How to add a compact I/O system:
1. Carry out steps 1 ... 5 as described in the instructions in the chapter entitled " Inserting an I/
O system ( 60) ".
2. Click the Complete button to insert the I/O system.
5.2.6.3 Modular I/O system IP20
[5-1] Example of a modular I/O system IP20

How to add a modular I/O system:
1. Carry out steps 1 ... 5 as described in the instructions in the chapter entitled " Inserting an I/
O system ( 60) ".
2. Select a modular I/O system (CAN Gateway) and click the Next button.
3. Attach module / Insert module in question.
4. Click the Complete button to insert the I/O modules.

Further information on Parameter setting & configuration of the
L-force I/O system 1000 can be found in the I/O system 1000 software manual

Note!
At least one module must be inserted at the CAN gateway base station.