Lenze Engineer v2.21 - Manual (Page 258)

Menu reference - Overview of the menu commands
"File" menu
258
Lenze · Engineer · 2.13 EN - 10/2014
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
13.1 "File" menu
Icon Command Shortcut Info
Creating/opening project
New <Ctrl>+<N>  Updating projects while opening them: Adapting
project file from previous version ( 39)
Open <Ctrl>+<O>  Opening the project file ( 38)
Save as -  Save a project ( 42)
Save <Ctrl>+<S>
Close Close a project that is open at present
• If the project still contains unsaved settings, a
dialog window appears to save the changes.
Opening/saving a compressed project/archive
Open an archive -  Open an archive ( 44)
Saving an archive -  Saving an archive ( 43)
Importing/exporting data
The menu command is available if a device is selected in the project tree.
Function block
interconnection
Import/export function block interconnection (XML
file)
• This function is available depending on the
device.  Function block editor (FB Editor)
( 149)
Monitor window view Import/export user-specific view of parameters in
the Monitor field (EPC file)
 Adapt monitor window: Show parameters
graphically (instruments) ( 25)
User menu Import/export user-specific compilation of
parameters (EPC file)
 Configuring the user menu ( 171)
Device parameters
parameter values
Import/export parameter set for the selected device
(Lenze GDC file).
• Import Lenze »Global Drive Control« (GDC) into
the project.
 Export the parameter values of a single device
( 269)
Export the data of all devices with selected Project root
Device parameters - Export device data from the project:
Export parameter set of the selected device to a file.
 Export parameter values of the devices ( 269)
Device-dependent commands are available with selected device:
EDS-/DCF file - Export the parameters of the selected project
element to an EDS/DCF file.
• * EDS is a file format of the Servo Drives 9400
device series.
Error texts - Export error texts of the device selected into a text
file (* .txt)