Lenze Engineer v2.21 - Manual (Page 301)

Lenze · Engineer · 2.13 EN - 10/2014
301
Appendix
User motors
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
3. In the Motor parameter tab, click the Apply default values to drive controller button.
Note: The default values will overwrite the controller settings!
• Confirm the query by clicking the Yes button to apply the default values to the drive
controller.

Tip!
If the default values of a user motor have been changed in the project, the motor can be
saved once again to the user motor catalogue. Replace the user motor already saved in the
user motor catalogue or save the modified user motor under another name.