Lenze Engineer v2.21 - Manual (Page 261)

Lenze · Engineer · 2.13 EN - 10/2014
261
Menu reference - Overview of the menu commands
"Online" menu
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Going offline <Shift>+<F4>  Going offline ( 96)
• If changes are not saved yet, a dialog window
appears to save the changes.
• This serves to save unsaved changes in the
respective device with mains failure protection.
Optical tracking
(only available if the
respective device supports
this function!)
Device search function for the specific identification
by triggering the device LEDs.
 Optical tracking - device identification within the
machine ( 107)
Manual control <F12> Manual control (available depending on the device)
Can only be activated if one device is selected and the
device supports this function.
 Manual control of the motor direction of rotation:
Rotating the axes manually ( 109)
Managing password protection (available depending on the device)
Set/check/delete
password
Define settings for protecting the device parameters
by means of a password.
• From Engineer V2.14 onwards , a password can be
set online in the 8400 device.
• Some 8400 device types support the assignment
of a password to protect the access to device
parameters. If the password is active, various
functions and interface elements are hidden or
deactivated.
• The status of the password protection is visible in
the status line of the Workspace.
Managing controller functions (available if the device is selected)
Enable controller (observe
controller inhibit via
terminal)
<F8>  Enable controller ( 100)
(Observe controller inhibit via terminal!)

 Safety instructions ( 12)
Inhibit controller <F9>  Inhibit controller ( 101)
Start application -  Start application ( 101)

 Safety instructions ( 12)
Stop application -  Stop application ( 101)
Download program -  Download program to device ( 103)
Download parameter set <F5>  Download parameter set to device ( 105)
Upload parameter set <F7>  Upload parameter set ( 106)
Store parameter set -  Save parameter set ( 107)
System bus configurator - Start system bus configurator
 System bus configurator ( 96)
Icon Command Shortcut Info