Lenze Engineer v2.21 - Manual (Page 21)

Lenze · Engineer · 2.13 EN - 10/2014
21
User interface
Workspace
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

Tip!
In order to focus on an element in the Project view, click on a project element or press the
<Tab> key until you reach the desired element.
3.3.4 Project root
The project root is the topmost element in the Project tree (root element). The name
corresponds to the file name of the project.
• If the project root is selected, the tabs including general project properties are visible in the
workspace.
3.4 Workspace
The workspace (area ) has various tabs which show the properties and settings of the project
element currently selected in the project tree. A project element can be for instance a device: Servo
Drives 9400 HighLine.
Shortcut Function
<PG UP> Browsing upwards in the Project tree.
<PG DN> Browsing downwards in the Project tree.
<UP ARROW> Selection of the next element up.
<DOWN ARROW> Selection of the next element down.
<LEFT ARROW> Depending on the symbol shown in front of the element:
/ Selection of the higher-level/lower-level element in the hierarchy.
<RIGHT ARROW Depending on the symbol shown in front of the element:
/ Selection of the higher-level/lower-level element in the hierarchy.
<BACKSPACE> Selection of the higher-level element in the hierarchy in each case.
<POS1> Selection of the first project element.
<END> Selection of the last (shown) project element.
Tab Function
Components Tabulates all components inserted into the project.
• The properties of the respective component are visible (device type,
firmware version, communication path) as well as the structural
integration in the form of system modules/axes.
Applications Tabulates all applications inserted into the project.
• The assignment to system modules/axes is visible.
Data logger The data logger serves to record the temporal course of parameter values
and display it as a line diagram.  Data logger ( 111)
• Note: For using this function, an online connection to the desired device
is required!
Documentation Provides the opportunity to enter detailed information on the project and
the projected machine plant.
• Notes and file attachments can be added to each project element.
 Documentation - Add project details ( 71)
Protection Settings for protecting the safe configuration
• Assign a project-related password for protecting the safe configuration
(tab Safe configuration, safe parameters.  Protecting safe parameters -
project-related password entry ( 74)