Ground multiple subpanels – Rockwell Automation 2094-xMxx-S Kinetix 6000 Multi-axis Servo Drives User Manual User Manual
Page 94
94
Rockwell Automation Publication 2094-UM001H-EN-P - June 2013
Chapter 5
Connecting the Kinetix 6000 Drive System
For mounting bracket dimensions, refer to the 2094 Mounting Brackets
Installation Instructions, publication
.
Ground Multiple Subpanels
In this figure, the chassis ground is extended to multiple subpanels.
Figure 47 - Subpanels Connected to a Single Ground Point
High-frequency (HF) bonding is not illustrated. For HF bonding information,
refer to Bonding Multiple Subpanels on
.
IMPORTANT
When 2094 mounting brackets are used to mount the power rail or LIM module
over the AC line filter, the braided ground strap must be removed from the
power rail and attached to a mounting bracket ground stud.
Follow NEC and applicable
local codes.
Bonded Ground Bus
Ground Grid or Power
Distribution Ground