AGI Security GVASBOX-100 - Manual (Page 32)

24
„ Global Anti-Passback: To perform the Anti-Passback application, see Chapter 6
Anti-Passback.
„ GeoFinger: If the door is installed with GV-GF Fingerprint Readers for fingerprint
authorization, select this option.
„ Time Clock: This option must be selected to enable GV-TAWeb. See Chapter 10
GV-TAWeb for Workforce Schedule for more details.
3. In the Two Person Rule section, select Entrance to require presenting Two Person A
Card and then Two Person B Card before the entry door is unlocked. Select Exit to
require presenting both cards in the right order before the exit door is unlocked.
4. To define the access mode, click the Authentication Schedule button. This dialog box
appears.
Figure 4-4
5. To define which kind of access mode should be applied at specific day and time, select
one access mode on the toolbar and drag the mouse over the timelines. Four (4) access
modes are available in the system:
„ Card Mode: This is the default mode. This mode only requires the user to present
his or her card to be granted access.
„ Release Mode: Keep the door in an unlock status with the reader.
• Release by Card: The door will unlock only after a card is presented and will
remain unlocked during the time specified for Release Mode. This option is
designed to prevent unattended doors from opening during the Release Mode
time.
„ Card and PIN Code Mode: This mode requires the user to present his or her card
and then enter the card’s PIN code on the keypad.
„ Card or Common Mode: This mode requires the user to present his or her card to
be granted access OR enter the door’s password using the keypad to be granted
access.