Verilink Access Manager 2000 (896-502037-001) Product Manual - Manual (Page 108)

Configuring Access Manager
4-22 Access Manager 2000 User Manual
Using the entries listed in Appendix D , "Installing Serial Ports", edit the
comline definition options as described in Adding a new comline
definition” on pa ge4-17.
Deleting a comline definition
1. From the Utilities Menu, select Installation . From the
Installation screen, select Comline . The screen labeled Revise
Comline Definitions will appear.
2. From the Revise Comline Definitions screen, select Delete . The
Select Comline to Delete screen now appears.
3. Highlight the comline to be deleted and press .
A warning message with the Comline and system port number now
appears, asking you to confirm that you want to delete it.
4. Choose one of the following actions:
• To delete the displayed comline, type Y .
• To cancel the request, press any other key
CAUTION
With a PS/2 using DigiCHANNEL MC/4 or MC/8 boards, Comline
must be deleted in reverse order from the order in which they were
installed. The highest COM number on a board (Port 4 for MC/4 an
Port 8 for MC/8) must be deleted first and then 7, 6, 5, 4, 3, 2, 1.
Failure to remove the Comlines in the correct order prevents Access
Manager from using any ports after the deleted ones.
5. After a comline is deleted, the system returns to the Select Comline
to Delete screen so that you can delete more comlines.
Enter
!