Verilink Access Manager 2000 (896-502037-001) Product Manual - Manual (Page 49)

Access Manager 2000 Main Menu
Access Manager 2000 User Manual 1-19
Element Configuration and Status-Element (Element Status)
These commands show the status, configuration, firmware, and hardware
revisions of the CSUs selected by accessing a CSU range. For Access
System 2000 nodes, the NCC, TAC, and DIU configuration status may
also be viewed.
Circuit Status Diagram
This command allows you to access and graphically display the near-end
CSU and associated far-end CSU to which a DS1 circuit is connected.
User Statistics
This command computes and displays the percentages of available and
error-free seconds, plus other user performance data for the selected CSU
and far-end CSU.
Telco Statistics
This command computes and displays the percentages of available and
error-free seconds, plus other Telco performance data for the selected
CSU and far-end CSU.
Reset User Registers
This command allows you to reset the user performance registers and
error event registers in both the near-end and far-end CSUs.
Performance Data Retrieve
These commands allow you to obtain the 1-hour or 24-hour DS1
performance data stored in a CSU or its associated far-end CSU. You can
view either the User data or the Telco data. If the CSU is an AS2000 type,
then EQPT data (as well as extra network registers) are available.
Barchart Display
This menu option displays performance data in bar chart format for the
current 24-hour period. Bar chart displays for historic performance data
are available through Database Access.