Verilink Access Manager 2000 (896-502037-001) Product Manual - Manual (Page 395)

Performance Data Log (Performance Database)
Access Manager 2000 User Manual E-13
N/A (Not Applicable) in the performance data register fields indicates
that the circuit element does not support that type of data collection.
“dis” indicates that the collection of performance data in the slot was
disabled for the period displayed. (FigureE- 2, “Circuit Element Detail
Menu (slot disabled),” on pag eE-13)
Figure E-2 Circuit Element Detail Menu (slot disabled)
Note: All 15-minute intervals are not displayed or recorded. The
explanation for unrecorded is:
■
If a performance data type (User, Additional, or EQPT) is disabled,
“dis” records are created to mark the beginning and end of the
disabled period. During the disabled period, records are created
every 12 hours on the polling hour. No other “dis” records are
created.
■
If a performance data type is all zeros for all its registers, “0
records” are created to mark the beginning and end of the all-zeros
period. During the period when all registers remain all zeros,
records are created every 12 hours, on the polling hour. No other “0
records” are created.