Verilink Access Manager 2000 (896-502037-001) Product Manual - Manual (Page 398)

Index
Index- 2 Access Manager 2000 User Manual
Bar chart of performance data, 7-6
C
changing, 4-21
Circuit, 1-9
definition, 5-102
listing all definitions, 5-107
viewing a definition, 5-107
Circuit element, 5-47, 5-57
Circuit element, 1-8
definition, 5-44
mixed 4016 List1 and 2 CSUs,
5-57
multiline plug-ins, 1-9
single-line, 1-8
ComDesign Mux., 4-19
adding node, 5-40
port, 1-10
Comline
adding, 4-17
built-in, D-12
COM1 port assignment, 4-17
comlines, 4-16
Configuration
DIU 2140, 5-98
configuration, 5-98
configuration error messages,
5-102
Configuration operations, 1-16,
4-16
communication ports, 4-16
Configuration, SMDS CSU
defining alarm conditions,
5-78 to 5-81
Configuring network circuit
elements, 5-44
ConnecT1 Plus
multiline node configuration,
1-6
Connections
direct-connect access
arrangement, 4-19
remote dial-up port access
arrangement, 4-19
routing port access
arrangement, 4-19
serial device, 4-20
Connections to nodes, 4-21
copy and delete records, 7-18
CSU (NCC or TAC) shelf and plug
numbers, 5-93, 5-99
CSU alarms
reporting conditions/
requirements, 5-19
CSU loopbacks, 8-47, 8-48
activate LLB, 8-46
activate PLB, 8-47
activate RLB, 8-46
deactivate PLB or LLB, 8-47
deactivate PLB, 8-47
description, 8-40
equipment (ELB), 8-43
repeater (RLB), 8-42
D
Daisy chain, 5-14
Daisy chained, 4-20
nodes, 1-5
Data analysis
central office filters, 7-5
customer premise filters, 7-5
filter selection logic, 7-7
user-defined threshold
percentages, 7-6
user-defined threshold
seconds, 7-6
Data analysis, 7-5
Data log, E-10
Database
alarms, 6-3
Database access operations, 1-20
density enforcement, 5-86
DigiBoard
PC - PS/2 serial port settings,
D-1
DigiCHANNEL
hardware installation, D-4
installing - PS/2, D-3
PC-XT/AT installation, D-8
preparation, D-3
PS/2 configuration, D-4
displaying all error event data, 7-5
DIU 2130
data scramble/descramble,
5-96
DIU 2130 (DIU 1130)
status, 8-18
DIU 2130 (DIU 1130), 8-49
DIU 2130 options, 5-93
64 kbps transmission mode,
5-96
DS1 channel assignment, 5-93
enable, 5-93, 5-99
EQP clock, 5-96
EQP interface type, 5-95
EQP name, 5-95
EQP serial number, 5-95
EQP speed, 5-96
handshaking control, 5-97
DIU 2140, 5-98
DIU 2140 options, 5-99
baud rate, 5-101
DS1 channel assignment, 5-99
synchronous data interface,
5-101
transmission mode, 5-99
DIU 2140, 8-19
DIU data bus assignment, 5-90
DIU loopbacks, 8-49
descriptions, 8-48
DIU2140, 8-49
DIU testing
sending a test signal, 8-59
Download
APA, 1-15
personality, 1-15
Drop-and-insert, 5-90
DTR Lead, with, B-1
DTR lead, without, B-1
E
enable, 5-90
enable EQP OOF transparency,
5-85
enable remote configuration, 5-77
enable testing options, 5-89
EQP
performance data, 7-3
EQP framing, 5-83
EQP side B8ZS encode/decode,
5-70, 5-83
Equipment type
551VST ML List1, 5-3
Event Log, 4-28
Event log, E-1
F, G
Far-end circuit element
configuration, 5-47