Verilink Access Manager 2000 (896-502037-001) Product Manual - Manual (Page 65)

Software Installation
Access Manager 2000 User Manual 2-15
Before Starting Accumaster
Before Accumaster is run for the first time, the network should be
configured. In particular, the Alarm output is configured (within Access
Manager) the same as configuring an Alarm Printer. Since only one alarm
output can be defined, the configuration of alarms being sent to
Accumaster precludes the use of a physical alarm printer. The
communications port to be used is configured as a Serial Device. If a
modem is used, it must be set to Auto Answer, as described in
AppendixB, "Modem Configuration".