Verilink Access Manager 2000 (896-502037-001) Product Manual - Manual (Page 243)

Deactivating alarms
Access Manager 2000 User Manual 6 -5
To deactivate alarm records by date and time:
1. Starting from the Main Menu, select Alarm Status . The Alarm
Status (Review Alarm Log Database) screen now appears.
2. From this screen, select Deactivate . The Deactivate (Select
Alarm to Deactivate) screen now appears. Follow these steps to
select a date and time range through which alarm records are
deactivated.
3. Press . The Enter Date/Time Range for Alarm Deactivation
screen appears.
The date and time range is displayed from the oldest alarm record in
the database to the current time. Change the date and time to the
range you want to deactivate.
4. To select all the alarms within the range entered, press the
key. Or, press to abort.
5. To deactivate the alarm reports in the selected range, press .
Or, press to abort deactivation.
6. If you pressed , a prompt appears, asking you to confirm that
you want to deactivate the selected alarms. To deactivate the alarms,
type
Y . Pressing any other key cancels deactivation of the selected
alarms.
Note: The alarm records selected by date and time are not shown on the
screen as they were in the preceding Tagging Alarm Records for
Deactivation section.
Selecting Alarm
Records by Date
and Time for
Deactivation
F8
F5
F2
Enter
F2
Enter