Verilink Access Manager 2000 (896-502037-001) Product Manual - Manual (Page 100)

Configuring Access Manager
4-14 Access Manager 2000 User Manual
• The current number of installed CSU circuit elements (that is,
configured in the database as
Installed and
Operational )
• The maximum number of CSU circuit elements which your
Access Manager Package permits to be installed. If there is no
restriction in the package, this is shown as
UNRESTRICTED .
The type of Access Manager package you have is shown last. This
can be
AM2000-8 , AM2000-24 , or AM2000-1000 .
When the current number of records reaches the maximum allowed,
no new records will be added. You may increase the maximum
number of records allowed to prevent loss of data, or you may
choose to take some time to archive or delete the older data.
2. Adjust the maximum allowable record numbers as needed.
3. Select one of the following actions:
• To save the changes made, press . The changes are saved,
and the current records used counts are updated.
• To exit the menu without saving the changes, press .
4. If you do not increase the allocations, you may reduce the records in
use by saving them to another file using the Archive function.
A comline, or communication line, is a serial port on your computer. It is
used to transmit to or receive data from a network node or another
computer through an Electronic Industries Association (EIA) standard
RS232 interface.
When you assign a comline definition, you specify what protocol, or
“language”, the port will be using to communicate with any device
connected to it.
F5
F2
Assigning comline
definitions