Verilink Access Manager 2000 (896-502037-001) Product Manual - Manual (Page 29)

Conventions used in this guide
Access Manager 2000 User Manual xxv
Check Boxes
Check boxes are used with checklists and sequential lists. Verilink
recommends that you photocopy these lists and use them each time you
attempt to execute a sequential operation.
A check box with a check mark indicates that the instruction may not be
necessary or may have already been done earlier.
Other conventions
The following conventions are used to reference special keys, keystroke
combinations, or other information:
■
Special keystroke(s) combinations are shown as:
<F5> or (to press the F5 function key).
<CTRL>-<PgUp> (to press and hold the CTRL key, and then
depress the PgUp key).
■
Some people are familiar with the <ENTER> key and some with the
<RETURN> key to end the entry of one or more keystrokes. The
designation <ENTER> is used throughout this manual.
■
If a message appears on the screen, it is fully capitalized as follows:
... the message NOT YET DEFINED displays.
■
All program and data file names are fully capitalized as follows:
.. the USER.KEY file is copied.
■
References to names of other chapters, sections, and menus are
initial-letter capitalized and italicized as follows:
... refer to the On-line Menu
Check Box
Check Box with Check Mark
F5