Verilink Access Manager 2000 (896-502037-001) Product Manual - Manual (Page 150)

Configuring the T1 Network
5-26 Access Manager 2000 User Manual
Figure 5-5 Application using X.25 PADs
What to do
To set up your alarm paths, you’ll need to:
■
Identify each Access Manager (see “Differentiating the site” on
page 4-3).
■
Assign priority to an alarm path
■
Set up alarm destination access
■
Determine how long to collect alarms before sending
■
Determine how often to try resending an alarm when a connection is
not made
You can define the alarm path when you first add a node or whenever you
edit a node. In either case, you need to access the new Alarm Path
Definition screen for the alarm configuration parameters.
To access the Alarm Path Definition screen:
■
In the Node Definition screen, go to the line labeled, Enable
alarm reporting , and press .
Access Manager #1
Access Manager #2
Public Data
Network
X.25 PAD X.25 PAD
X.25 PAD
AS2000 Node
N
C
C
2
0
2
0
Channel 2 Link Port Link Port Channel 1
Link Port
Channel 1
F8