Verilink Access Manager 2000 (896-502037-001) Product Manual - Manual (Page 57)

Software Installation
Access Manager 2000 User Manual 2-7
To copy the CONFIG.SYS file to the root directory of the boot drive:
1. Type C: and press to return to the boot drive.
2. Type CD\ and press to return to the root directory on the
boot drive.
3. Insert Diskette #1 of Access Manager 2000 into drive A.
4. At the boot drive prompt, type COPY A: CONFIG.SYS and
press .
The CONFIG.SYS file is created in the root directory.
5. Remove the diskette from drive A.
Note: The new values for FILES and BUFFERS are not in effect until
the host PC is rebooted and DOS is restarted.
6. Reboot your system to activate the new values before starting
Access Manager. Otherwise, you will not be able to log into Access
Manager.
To modify an existing CONFIG.SYS file:
The existing CONFIG.SYS file must be modified if it does not contain
FILES=24 (or greater) and BUFFERS = 20 (or greater).
1. Modify the CONFIG.SYS file with EDLIN (the text editor for
DOS) or with any text editor or word processor with an ASCII text
editor option.
2. Reboot the system after you change the CONFIG.SYS file. The
values for FILES and BUFFERS are not in effect until you do.
Use the following procedure if Access Manager is installed on your host
PC and you want to upgrade to the current version.
To update an existing Access Manager system:
Enter
Enter
Enter
Updating an
existing Access
Manager system