Verilink Access Manager 2000 (896-502037-001) Product Manual - Manual (Page 23)

What’s in this Manual?
Access Manager 2000 User Manual xix
Installing Access Manager
Provides instructions for installing the Access Manager software on an
IBM PC AT or 100% IBM-compatible computer. It also outlines the
controller and peripheral equipment requirements for using Access
Manager.
Using Access Manager
Provides the instructions for performing various Access Manager
procedures including start-up, shut-down, and backup. This chapter also
describes the command syntax and keyboard operations used in this
manual.
Configuring Access Manager
Provides a reference for the Utilities branch of the Access Mana ger2000
menu. Utilities includes setting up communication interfaces between the
host PC, network elements, and peripheral devices. Utilities also
administers Access Manager users, the system’s event log, and
downloading of Advanced Programmable Architecture (APA).
Configuring the T1 Network
Provides a reference for the Configuration branch of the Access
Manager 2000 menu. Configuration establishes the operating
characteristics of the network elements (such as Channel Service Units
[CSUs], Data Service Units [DSUs], etc.). The proper configuration of
nodes, circuit elements, circuits, and routes is essential for proper
network operation, monitoring, and testing.
Alarm Reporting
Provides a reference for the Alarm Status branch of the Access
Manager 2000 menu. Alarm Status manages the database of Access
Manager alarm reports, including printing, archiving, viewing, and
deleting these reports.
Chapter 2
Chapter 3
Chapter 4
Chapter 5
Chapter 6