Verilink Access Manager 2000 (896-502037-001) Product Manual - Manual (Page 110)

Configuring Access Manager
4-24 Access Manager 2000 User Manual
The access level of the current user is shown in the lower right box of
each screen. Four access levels are possible, each permitting a user to
perform certain operations. These levels are as follows.
From the Utilities Menu, select User Definitions . The screen
labeled Revise User Definitions appears.
Access Level and
Definition Functions
Level 1
Read information
Information can be retrieved but registers cannot be
reset, and working parameters and options cannot be
modified.
Level 2
Read with limited
parameter modifications
Allows Level 1 capabilities, plus non-service-affecting
functions and parameter modifications, such as resetting
performance registers and enabling circuit element
retrieval of performance data. On color monitors, the
selected screens show parameters that can be modified
in blue and parameters that cannot be modified in red.
On monochrome monitors, the parameters that can be
modified appear as highlighted characters and the
parameters that cannot appear in normal characte
mode.
Level 3
Read with parameter
modifications
Allows Level 1 and 2 functions plus service-affecting
functions (for example, loopback or testing), and
parameter modifications (for example, network element
configuration).
Level 4
System manager
Level 1 through 3 functions plus addition and deletion of
users, changing passwords and access levels,
performing all system installation and archive functions,
and shutting down the system. Access Manager doe
not allow the system to be modified in such a way that no
system manager access level exists.