Verilink Access Manager 2000 (896-502037-001) Product Manual - Manual (Page 314)

Monitoring and Troubleshooting Access Manager
8-44 Access Manager 2000 User Manual
1. When you get the On-line Access sub-menu, select the
Loopbacks option.
The Specify Circuit Element to Receive Loopback screen appears.
Single-line CSUs do not present this screen.
• CSU Shelf Number: Enter the shelf number of the plug-in CSU
circuit element to receive the loopback request. Only AS2000 or
ConnecT1 Plus CSUs, and CSUs in shelves controlled by an
NC/E, have a
CSU Shelf Number option.
• CSU Plug Number: Enter the slot number of the plug-in CSU
circuit element to receive the loopback request.
2. Press the key to enter the CSU shelf and slot numbers. A
Select Loopback Activity screen appears.
• If you are working on an AS2000 or ConnecT1 Plus CSU, you
will see the following menu:
F5