Verilink Access Manager 2000 (896-502037-001) Product Manual - Manual (Page 258)

Analyzing Performance Data
7-8 Access Manager 2000 User Manual
Steps 6 and 7 deal with setting the date and time range for the S-user or
P-user filters.
6. After selecting the filter option in Step 3 and completing Step 4 or 5
(if S-User or P-User was chosen), the Enter Date/Time
Range for Report screen appears.
Enter the date and time range over which you want performance
data analysis to occur. The beginning and end of the period for the
analysis is set to the nearest quarter hour.
After entering the date and time range, press to accept the
date/time range, or press to return to the previous screen.
(This step does not apply if the Bar Chart filter is chosen.)
If the From and/or To dates fall outside the range of available
data, Access Manager generates a warning message indicating
which date parameters have fallen outside the range. This message
also indicates that the date and time range has been reset.
Pressing any key returns you to the Enter Date/Time Range for
Report screen. From this screen, you can either change the date and
time to some period within the available range, or you can press
to return to the previous screen.
7. If the Bar Chart option was chosen in Step 3, a different Date
and Time screen appears. Enter the starting date and time only. The
ending date and time is always 24 hours after your entered starting
time.
F5
F2
F2