Verilink Access Manager 2000 (896-502037-001) Product Manual - Manual (Page 72)

Using Access Manager
3-6 Access Manager 2000 User Manual
Status screens provide information directly from on-line data. Status
screens are “read only” and provide status information only for the
moment that you access the screen. The screen does not update itself. To
find out that a condition you see on the screen has changed, you would
have to exit out of the screen and then reaccess it.
Alarm notifications, however, do let you know immediately if there is a
significant change.
This section describes the function keys, cursor movement keys, and
special keys used at a PC keyboard.
■
Function keys are used to select and/or activate specific operations
in Access Manager.
■
Cursor movement keys, also known as directional keys, are used to
move between fields and screens.
■
Special keys are used to perform special functions within Access
Manager. Sometimes, this involves using keystroke combinations.
Because there are differences between the keyboards, it subsequently
describes the equivalent keystrokes used at a VT100 terminal keyboard.
Regardless of the operation mode (PC or VT100), the keyboard directly
attached to the Access Manager computer always uses the normal PC
function keys.
Function keys
The <F1> through <F10> function keys are used to select and/or activate
specific operations in Access Manager.
If you are running pcANYWHERE, the function keys are not available.
Status Display
Keyboard