Verilink Access Manager 2000 (896-502037-001) Product Manual - Manual (Page 76)

Using Access Manager
3-10 Access Manager 2000 User Manual
Table 3-3 Special key definitions in PC mode
Key
<ENTER> Pressing the key either selects the option
highlighted by the current cursor position from a menu
screen, or accepts the value of data entered into a
selected field. If less than the maximum number of
characters are entered in a field, press t
complete the entry for that line and move the highlight to
the next line.
The following four choices require the key to be pressed and held while pressing the
second key. The key is displayed on the Function Key Definition screen and many othe
screens as (^).
<Ctrl>-<PgDn> Next Element Press the key combination to select the
next circuit element in a selected range. This key name
appears on the screen as <Ctrl>-<PgDn>.
<Ctrl>-<PgUp> Previou
Element Press the key combination to select the
previous circuit element in the selected range. This key
name appears on the screen as <Ctrl>-<PgUp>.
<Ctrl>-<Left
Arrow> Near End Press the key combination from the On-
line screens to select the near-end CSU information.
This key name appears on the screen as <Ctrl>-<Right
Arrow> Near-end.
<Ctrl>-<Right
Arrow> Far End Press the key combination from the On-
line screens to select the far-end CSU information. This
key name appears on the screen as <Ctrl>-<Right
Arrow> Far-end.
<ESCAPE> Press the key to cancel data input requests on
an operational basis and to exit an option menu without
selecting an option. Also press
to immediately
abort a connection request or print request.
Enter
Enter
Ctrl
Ctrl
Ctrl
PgDn
Ctrl
PgUp
Ctrl
Ctrl
Esc
Esc