Verilink Access Manager 2000 (896-502037-001) Product Manual - Manual (Page 81)

Getting started with Access Manager
Access Manager 2000 User Manual 3-15
■
follow the procedure to manually start Access Manager:
To manually start Access Manager:
1. Turn on and boot up your computer so that the operating system
prompt (usually C:> ) appears on the screen.
2. Type CD AM2000 (or the name you assigned the directory where
you installed Access Manager). Press .
3. If you are using pcANYWHERE III, type
AN YWHEREAUTOMATIC .
Press to load the program.
4. To start Access Manager, use one of the following commands:
After Access Manager is started, the AM2000 Username screen
appears and prompts you to enter a user name to log into Access
Manager.
If you are using a Type:
color monitor with a color adapter card AM2000
monochrome monitor with a monochrome adapter
card AM2000/BW
monochrome monitor with a color adapter card AM2000/BW
Enter
Enter
Access Manager
input screen for user name
serial numbe