Verilink Access Manager 2000 (896-502037-001) Product Manual User Manual
Page 178
Advertising
Configuring the T1 Network
5-54
Access Manager 2000 User Manual
•
ConnecT1 Plus CSU
6. At this point, you’ll need to configure the parameters available for
your equipment type.
You must delete an AS2000 or ConnecT1 Plus circuit element before you
can replace it with one of a different type.
To delete a circuit element configuration:
1. Starting from the Main Menu, select
Configuration
. The
screen labeled Configuration appears.
Deleting circuit
element definitions
Advertising