Verilink Access Manager 2000 (896-502037-001) Product Manual - Manual (Page 245)

Listing active alarms
Access Manager 2000 User Manual 6 -7
The Alarm Time Stamp for AS2000 and 551VST type circuit
elements (hardware) is the time the alarm report is detected by the
AS2000 type node (if AS2000 CSU is near-end).
It is important to note that the AS2000 type node’s date/time clock
is synchronized to Access Manager’s clock every time the node is
polled. Therefore, if the node is not set for polling, the date/time
clocks stamps in its reports may be invalid.
Note: The screen response in this option can be slow if the number of
active or deactivated alarms is large.
Listing active alarms
The List Active option prints a list of active alarm records to the
report printer
To print a list of active alarm records to the report printer:
1. Starting from the Main Menu, select Alarm Status . The Alarm
Status (Review Alarm Log Database) screen appears.
2. From this screen, select List . The active records will be sent to
the report printer
Printing all alarms
The Print All option prints all the alarm records, including the
deactivated alarm records, to the report printer.
To print all alarm records to the report printer:
1. Starting from the Main Menu, select Alarm Status . The Alarm
Status (Review Alarm Log Database) screen appears.
2. From this screen, select Print . The active records will be sent to
the report printer