INFICON Explorer Portable Gas Chromatograph - Manual (Page 40)

Explorer Operator Manual
38
WARNING
Do not modify or disassemble the carrier gas filling station. If you have
any problems, the unit must be returned to
INFICON for repair or
replacement.
To fill the internal cylinder:
1. Connect the filling station fitting to the gas cylinder.
You must specify a CGA 590, or CGA 580 when ordering the filling station.
Figure 3 Carrier Gas Refill Adapters (CGA 590 and CGA 580)
2. Turn the filling station valve handle so that it points away from the cylinder.
3. Open the cylinder valve and check that there are no leaks.
4. Place Explorer on a sturdy flat surface within easy reach of the flexible filling
hose.
3-way valve
Quick connect
Relief valve
Flow restrictor
Flexible hose