Status line – INFICON Explorer Portable Gas Chromatograph User Manual
Page 61
Using
Explorer
Status Line
The top line of the display will always be the status line. When the instrument is
idle, the instrument status, the date, time, sample inlet and detector are displayed.
One of four sampling options will be displayed:
Sampling Method
Status Line Code
Loop Injection
LP
Long Sample Probe
PRB
Extended Sample Probe
PRB
Syringe Injection
SYR
If a fault occurs, the top line of the display will alternate between the fault message
and the status line.
When
Explorer is performing a run the status line will display the instrument status,
an analysis timer, the current column, the run # and detector.
If you are reviewing logged data, the status line will display the time and date the
analysis was run. This information will alternate with the column and run #.
Instrument Status
Description
Alarm
Alarm
condition
on
last run
Sample
The pump is drawing a sample
Analyze
Analysis
in
progress
Ready
Ready to start an analysis
59